Metamerism (color)

[edit] Americola's celebrity biographies are provided by AmericolaWiki, a celebrity wiki. You can help contribute to Americola and edit this article.

This article is about metamerism as it relates to color theory. For other meanings see the disambiguation page.

Metamerism is the situation where two color samples with different spectral power distributions appear to be the same color when viewed side by side. A spectral power distribution describes the proportion of total light emitted, transmitted or reflected by a color sample at every visible wavelength; it precisely defines the light from any physical stimulus. However, the human eye contains only three color receptors (cones), which means all colors are reduced to three sensory quantities, called the tristimulus values. Metamerism occurs because each type of cone responds to the cumulative energy from a broad range of wavelengths, so that different combinations of light across all wavelengths can produce an equivalent receptor response and the same tristimulus values or color sensation. Two spectrally different color samples that visually match are metamers.

Contents 1 Sources of metamerism 2 Metameric failure 3 Related concepts 4 Metamerism and industry 5 Sources

Sources of metamerism

Metameric matches are quite common, especially in near neutral (grayed or whitish colors) or dark colors. As colors become lighter or more saturated, the range of possible metameric matches (different combinations of light wavelengths) becomes smaller, especially in surface colors.

Metameric matches made between two light sources provide the trichromatic basis of colorimetry. For any given light stimulus, regardless of the form of its spectral emittance curve, there always exists a unique mixture of three "primary" lights that when added together, or added to the stimulus, will exactly match it, provided the lights are adjusted to have equal brightness.

The basis for nearly all commercially available color image reproduction processes such as photography, television, printing, digital imaging etc., are based on the ability to make metameric color matches.

Making metamerism matches using reflective materials is more complex. The appearance of surface colors is defined by the product of the spectral reflectance curve of the material and the spectral emittance curve of the light source shining on it. As a result, the color of surfaces depends on the light source used to illuminate them.

Metameric failure

The term Illuminant metameric failure is sometimes used to describe situations where two material samples match when viewed under one light source but not another. Most types of fluorescent lights produce an irregular or peaky spectral emittance curve, so that two materials under fluorescent light might not match, even though they are a metameric match to an incandescent "white" light source with a nearly flat or smooth emittance curve. Material colors that match under one source will often appear different under the other.

Normally, material attributes such as translucency, gloss or surface texture are not considered in color matching. However geometric metameric failure can occur when two samples match when viewed from one angle, but then fail to match when viewed from a different angle. A common example is the color variation that appears in pearlescent auto finishes.

Observer metameric failure can occur because of differences in color vision between observers. The common source of observer metameric failure is colorblindness, but it is also not uncommon among "normal" observers. In all cases, the proportion of long-wavelength-sensitive cones to medium-wavelength-sensitive cones in the retina, the profile of light sensitivity in each type of cone, and the amount of yellowing in the lens and macular pigment of the eye, differs from one person to the next. This alters the relative importance of different wavelengths in a spectral power distribution to each observer's color perception. As a result, two spectrally dissimilar lights or surfaces may produce a color match for one observer but fail to match when viewed by a second observer.

Finally, field-size metameric failure occurs because the relative proportions of the three cone types in the retina vary from the center of the visual field to the periphery, so that colors that match when viewed as very small, centrally fixated areas may appear different when presented as large color areas. In many industrial applications, large field color matches are used to define color tolerances.

The difference in the spectral compositions of two metameric stimuli is often referred to as the degree of metamerism. The sensitivity of a metameric match to any changes in the spectral elements that form the colors depend on the degree of metamerism. Two stimuli with a high degree of metamerism are likely to be very sensitive to any changes in the illuminant, material composition, observer, field of view, etc.

The word metamerism is often used incorrectly, to indicate a metameric failure rather than a match, or to describe a situation in which two colors are highly metameric, and hence the metameric match is easily degraded by a slight change in conditions, such as a change in illuminant.

Related concepts

Color Appearance deals with the issue of different tristimulus colors appearing to be the same under different viewing conditions, or identical tristimulus colors appearing different under different viewing conditions. Color Appearance Models provide a means of predicting color appearance under a variety of viewing conditions.

Color constancy is the everyday perception that the color of objects remain unchanged across significant changes in illumination color and luminance level. Color constancy is related to Memory colors and Discounting the illuminant.

Metamerism and industry

Using material that are metameric color matches rather than spectral color matches, is a significant problem in industries where color matching or color tolerances are important. A classic example is in automobiles: the interior fabrics, plastics and paints may be manufactured to provide a good color match under a standard light source (such as the sun), but the matches can disappear under different light sources (fluorescent or halide lights). Similar problems can occur in apparel manufactured from different types of dye or using different types of fabric, or in quality color printing using different types of inks. Papers manufactured with brighteners are especially susceptible to color changes when lights differ in their short wavelength radiation, which can cause some papers to fluoresce.

Color matches made in the paint industry are often aimed at achieving a spectral color match, as well as a tristimulus (metameric) color match. A spectral color match attempts to give two colors the same spectral reflectance characteristic, making them a good metameric match with a low degree of metamerism, and thereby reducing the resulting color matches sensitivity to changes in illuminant, or differences between observers.

Sources

• Wyszecki, Günter and Stiles, W.S. (2000). Color Science - Concepts and Methods, Quantitative Data and Formulae, 2nd edition, New York: Wiley-Interscience. ISBN 0-471-39918-3. 

• R.W.G Hunt. The Reproduction of Color (2nd ed.). Chichester: John Wiley & Sons, 2004.
• Mark D. Fairchild. Color Appearance Models Addison Wesley Longman, 1998.de:Metamerie (Beleuchtungstechnik)

es:Metamerismo (color) fr:Métamérisme nl:Metamerie pl:Metameryzm ru:Метамерия (цвет) sl:Metamerizem sv:Metameri

Wikipedia information about Metamerism (color) This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article "Metamerism (color)". It may not have been reviewed by professional editors (see full disclaimer). Help contribute to Americola and edit this article.