Jackhammer

A pneumatic drill or jackhammer is a portable percussive-drill, operated by compressed air and used to drill rock, break up pavement, etc. It works in the manner of a hammer and chisel, by jabbing with its bit, not by rotating it. (A drill, driven by compressed air, which rotates its cutting bit is called an air-drill or, more familiarly, a windy-drill.) The word jackhammer is used in North American English and in Australia, and pneumatic drill is used colloquially elsewhere in the English speaking world, although (road) breaker is used in the trade.

The portable pneumatic jackhammer is impractical for use on walls and steep slopes as it relies on the inertia of the mass of its body to impel the bit into the work and manipulating that mass when it is not supported by the work is highly difficult. Besides, gravity is required to bring the mass back into contact with the work after each blow. Though it is unhealthy practice, the operator may lean on the tool to assist but he is not really capable of overcoming the forces involved when he is not assisted by gravity.

Its pneumatic hose connections are designed so that any hose end will connect with any hose end without the workman having to keep track of male and female hose-ends: see Gender of connectors and fasteners.

Hydraulic operation

A hydraulic jackhammer (on a much larger scale than the portable ones) may be fitted to mechanical excavators and is widely used on roadwork, quarrying and general demolition or constructional groundwork. In mining, it is possible to use this against a vertical wall as the machine can be jacked off the opposite wall of the gallery or some comparable device. For reasons of safety, pneumatic tools are likely to be used underground on a coal mine.

Hydraulic breakers will usually use a hydraulic motor to drive a sealed pneumatic hammer system, as a hydraulic hammer would not only develop a poor striking speed but transfer unacceptable shock loads to the pump system.

Electro-mechanical operation

While the term "jackhammer" is occasionally used to mean "pneumatic drill", the electromechanical tool that performs the same function is normally the one called a "jackhammer" in Britain. This tool is useful where the work is light and not accessible from a compressor.

The Makita breaker pictured uses standard 25mm (1") points and chisels identical to the ones used in medium sized pneumatic tools. It draws 1300W and weighs about 19 kilo with a point in it.

This type and size of machine is commonly hired by amateurs for renovation type jobs.

Health

The sound of the repeated hammer-blows combined with the explosive exhaust of the air, makes pneumatic jackhammers dangerously noisy, emitting 100 decibels at two meters. Sound-blocking earmuffs must be worn by the operator to prevent a form of hearing damage of which tinnitus is the main symptom. As a result, most pneumatic jackhammers now have a silencer around the barrel of the tool: it is the black part in the image below.

Prolonged exposure to the very pronounced vibration set up by the tool can lead to blood-circulation failures in the fingers, a condition known as white finger. Furthermore, pneumatic drill usage can predispose one to developing carpal tunnel syndrome.

Images

Pneumatic drill / jackhammer, with black silencer attached

Compressor for running a pneumatic drill / jackhammer off

Close-up of hose coupling for pneumatic drill / jackhammer air hose

External Links

Using a jack hammer non commercial help site.de:Drucklufthammer fr:Perforateur nl:Drilboor pl:Młot pneumatyczny

Wikipedia information about Jackhammer This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article "Jackhammer". It may not have been reviewed by professional editors (see full disclaimer). Help contribute to Americola and edit this article.