Gladius

Gladius is a Latin word for sword. Early Roman swords were similar to those used by the Greeks. From the 3rd century BC the Romans adopted swords similar to those used by the Celtiberians and others, during the Conquest of Hispania. This kind of sword was known as the Gladius Hispaniensis, or "Hispanic Sword". It was once thought that they were similar to the later Mainz types, but the evidence now suggests that this was not the case.^[1] Rather these early blades followed a slightly different pattern, being longer and narrower, and were probably those that Polybius^[2] considered good for both cut and thrust. Later extant Gladii are now known as the Mainz, Fulham and Pompei types. In the late Roman period Vegetius^[3] refers to swords called semispathae (or semispathia) and spathae, for both of which he appears to consider gladius an appropriate term.

A fully equipped Roman soldier would have been armed with a shield (scutum), several javelins (pila), a sword (gladius), probably a dagger (pugio) and perhaps a number of darts (plumbata). Conventionally, the javelins would be thrown before engaging the enemy, at which point the gladius would be drawn. The soldier generally led with his shield and thrust with his sword. Contrary to popular belief, all types of gladius appear to have also been suitable for cutting and chopping motions as well as for thrusting.

Etymology

The name is a Latin o-stem noun, its plural being gladii. The diminutive form, gladiolus, is also the name of a flowering plant with sword-shaped leaves. Gladius is used in literature as early as the plays of Plautus (Casina, Rudens).

Celtic origin

According to Julius Pokorny the term would be of Celtic origin, from Gaulish *kladyos, cognate to Welsh cleddyf and Breton kleze (Old Irish claideb is from the Brythonic, compare claymore), all meaning "sword", ultimately from a PIE base kelad- (extended from a root kel-) cognate to Latin clādēs "injury, damage, defeat".^[4] Gladius could also be a term used to describe a dagger, Pugio.^[5]

Acquisition by the Romans

The Hispanic sword was probably not acquired from Hispania and not from the Carthaginians. Livy^[6] relates the story of Titus Manlius Torquatus taking up a Gallic challenge to a single combat by a large-size soldier at a bridge over the Anio river, where the Gauls and the Romans were encamped on opposite sides of the river. Manlius strapped on a Hispanic sword (Gladius Hispanus^[7]). During the combat he thrust twice with it under the shield of the Gaul, dealing fatal blows to the abdomen. He then removed the Gaul's torc and placed it around his own neck, whence the name, torquatus.

The combat happened in the consulships of C. Sulpicius and C. Licinius in about 361 BCE, much before the Punic Wars, but during the frontier wars with the Gauls (366-341 BCE). One theory therefore proposes the borrowing of the word gladius from *kladi- during this period, relying on the principle that k becomes g in Latin only in loans. Ennius attests the word. Gladius may have replaced ensis, which in the literary periods was used mainly by the poets.^[8]

The debate on the origin of the gladius Hispanus continues. That it descended ultimately from Celtic swords of the La Tene and Hallstat periods is unquestioned. Whether it did so directly from Celtiberian troops of the Punic Wars or through Gallic troops of the Gallic Wars remains the question of the Hispanic sword.

Gladius and gladiator

The gladiator etymologically was a slave (more rarely a free volunteer) who fought to the death using a gladius in a display called a ludus, "game", in origin held as part of the funeral celebration in honor of a notable warrior. The time the custom began is lost in the prehistoric Bronze Age.

Etruscans held funeral ludi from an unknown provenience. They passed the custom on to the Romans. In Roman gladiatorial theory, prisoners of war were to be sacrificed as a duty to the deceased warrior; hence the games were called munera, "services." Over the centuries services were rendered through many forms of combat. The sacrificed went by many names.

Even among the Romans combat and weapons were of many forms. That being so, the choice of the word gladius needs to be explained. It must have been appropriate when displays began at Rome. Games were held first by Latin speakers at Capua, a renamed Etruscan city. Livy explains that in 308 BCE the Samnites were defeated by the Campanians, who captured a large cache of new and ornate arms, only acquired by the Samnites in 310 BCE. The Campanians gave these to their gladiators, innovating a new class of gladiator, the Samnites. They fought with the gladius.^[9]

When the Romans instituted the games at Rome in 264 BCE, they displayed 22 pairs of matched gladiators. They were probably called gladiators then, though the only evidence is Livy's word for it. He may have been speaking anachronistically; however, his description of the Gallic combat above matches the use of the gladius. The dates, certainly, are right. In that same year, the Punic Wars began.

Manufacture

By the time of the Roman Republic, which flourished during the Iron Age, the classical world was well-acquainted with steel and the steel-making process. Pure iron is relatively soft, but pure iron is never found in nature. Natural iron ore contains various impurities in solid solution, which harden the reduced metal by producing irregular-shaped metallic crystals.

The Chalybes of the Caucasus region were metallurgists for Iron-Age Europe and they had found that increasing carbon content produced harder steel. In Roman times ore was reduced in a bloomery furnace, as the blast furnace had not yet been invented, at least in western society. The temperature did not become high enough to actually melt the metal. The result was pieces of slag, or blooms, which were forged into the desired shape. Forging continued until the metal cooled (cold forging).

A recent metallurgical study of two Etrurian swords, one in the form of a Greek kopis from 7th century BCE Vetulonia, and one in the form of a gladius Hispanus from 3rd century BCE Chiusi, gives some insight concerning the manufacture of Roman swords.^[10] The Chiusi sword comes from Romanized Etruria; thus, regardless of the names of the forms (which the authors do not identify), the authors believe the process was continuous from the Etruscans to the Romans.

The Vetulonian sword was crafted by the pattern welding process from five blooms reduced at a temperature of 1163 °C. Five strips of varying carbon content were created. A central core of the sword contained the highest: 0.15–0.25% carbon. On its edges were placed four strips of low-carbon steel, 0.05–0.07%, and the whole thing was welded together by forging on the pattern of hammer blows. A blow increased the temperature sufficiently to produce a friction weld at that spot. Forging continued until the steel was cold, producing some central annealing. The sword was 58 cm long.^{[citation needed]}

The Chiusian sword was created from a single bloom by forging from a temperature of 1237 °C. The carbon content increased from 0.05–0.08% at the back side of the sword to 0.35–0.4% on the blade, from which the authors deduce some form of carburization may have been used. The sword was 40 cm long and was characterized by a wasp-waist close to the hilt.

Roman swords continued to be forged both as composites and from single pieces. Inclusions of sand and rust weakened the two swords of the study and no doubt limited the strength of swords during the Roman period.

Description

The word gladius acquired a general meaning as any type of sword. This use appears as early as the 1st century CE in the Biography of Alexander the Great by Quintus Curtius Rufus.^[11] The republican authors, however, appear to mean a specific type of sword, which is now known from archaeology to have had variants.

Gladii were two-edged for cutting and had a tapered point for stabbing during thrusting. A solid grip was provided by a knobbed hilt added on, possibly with ridges for the fingers. Blade strength was achieved by welding together strips, in which case the sword had a channel down the center, or by fashioning a single piece of high-carbon steel, rhomboidal in cross-section. The owner's name was often engraved or punched on the blade.

Stabbing was a very efficient technique as stabbing wounds, especially in the abdominal area, were almost always deadly (see the quotation from Vegetius under pugio). However, the gladius in some circumstances was used for cutting or slashing, as is indicated by Livy's account of the Macedonian Wars, wherein the Macedonian soldiers were horrified to see dismembered bodies.^[12]

The gladius was sheathed in a scabbard mounted on a belt or shoulder strap, some say on the right, some say on the left (refer to the articles cited in the notes). Some say the soldier reached across his body to draw it, and others affirm that the position of the shield made this method of drawing impossible. A centurion wore it on the opposite side as a mark of distinction.^[13]

Towards the end of the second century A.D. the spatha took the place of the gladius in the Roman legions.

Types

Several different designs were used; among collectors and historical reenactors, the three primary kinds are known as the Mainz gladius, the Fulham gladius, and the Pompeii gladius (these names refer to where or how the canonical example was found). More recent archaeological finds have uncovered an earlier version, the Gladius Hispaniensis ("Hispanic sword").

The differences between these varieties are subtle. The original Hispanic sword, or Falcata, had a slight "wasp-waist" or "leaf-blade" curvature. It was used in the republic. The Mainz variety came into use on the frontier in the early empire. It kept the curvature, but shortened and widened the blade and made the point triangular. At home the less battle-effective Pompei version came into use. It eliminated the curvature, lengthened the blade, and diminished the point. The Fulham was a compromise, with straight edges and a long point.^[14]

Descriptions of the main types follow:

• Gladius Hispaniensis: Used from no later than 200 B.C. until 20 B.C. Blade length 64 cm - 69 cm. Sword length 74 cm - 81 cm. Sword width 5 cm. Short blade, broad towards the handle. (Example 1, Example 2, Example 3)
• Mainz: Mainz was founded as the Roman permanent camp of Moguntiacum probably in 13 BC. This large camp provided a population base for the growing city around it. Sword manufacture probably began in the camp and was continued in the city; for example, Gaius Gentilius Victor, a veteran of Legio XXII, used his discharge bonus on retirement to set up a business as a negotiator gladiarius, a manufacturer and dealer of arms.^[15] Swords made at Mainz were sold extensively to the north. They are characterized by a slight waist running the length of the blade and a long point. Blade width 7-8 cm. Blade length 66 cm - 70 cm. Sword mass: 1.2 kg - 1.6 kg. (Example 1, Example 2, Example 3, Video demo)
• Fulham or Mainz-Fulham: The sword that gave the name to the type was dredged from the Thames near Fulham and must therefore date to a time after the Roman occupation of Britain began. That would have been after the invasion of Aulus Plautius in 43 CE. It was used until the end of the same century. It is considered the conjunction point between Mainz and Pompei. Some consider it an evolution or the same as the Mainz type. Blade length 70 cm blade width: 6 cm at the base, 4 cm in the middle, 7 cm in the end. (Example 1, Example 2)
• Pompei (or Pompeianus or Pompeii): Named by moderns after the Roman town of Pompeii, which was destroyed by volcanic eruption, 79 AD, with great loss of life, despite efforts of the Roman navy to get them out. Four instances of the sword type were found there, with others turning up elsewhere. The sword has parallel cutting edges and a triangular tip. Original blade length of 60 cm, blade length from circa 75 A.D. of 68 cm - 71 cm. From circa 100 A.D. of 83 cm (semi-spatha). From now on the Roman Gladius will be of middle-length. (Example 1, Example 2)

Scabbard

Roman scabbards were made of wood covered with leather and were decorated with a frame made of brass or iron.

The Latin word for the scabbard is vagina and some weapons experts and enthusiasts refer to the scabbard of a gladius by this Latin word. It acquired its modern meaning by means of a simple metaphor. The Romans generally did not use this word in its anatomical sense, but it does show up as a joke in Plautus, Pseudolus 4.7.85: "Did the soldier's 'sword' fit well into your 'sheath'?"

Hilt

The hilt of a Roman sword was the capulus. It was often ornate, especially the sword-hilts of officers and dignitaries.

Symbolism

The gladius is frequently depicted in coats of arms, especially of military corps.

Coat of arms of the former municipality of Donath, showing the Pompeii gladius.

Coat of Arms of Mscisłaŭ, Belarus, showing the Hispanic gladius.

Coat of arms of Kostrzyn, Poland, the Pompeii gladius.

Notes

References

• Significant Contributions in the Study of European Arms and Armor, bibliography by the Arms and Armor Society of America.
• Armamentarium: subject bibliographies: swords
• John William Humphrey, John Peter Oleson, Andrew Neil Sherwood, Greek and Roman Technology: a sourcebook

Wikipedia information about Gladius This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article "Gladius". It may not have been reviewed by professional editors (see full disclaimer). Help contribute to Americola and edit this article.